Thermco Products Inc

CALL: (973) 300-9100  9am to 5pm est

When Temperature Matters

  • Home
  • Data Loggers
  • LogTag Temp Humidity Data-Logger
    • Print

    LogTag
    Temperature & Humidity
    Data Logger

    Measures and stores up to 8000 sets of high resolution humidity and temperature readings

    USB

    CATALOG NO. DESCRIPTION
    LTHAX08 Data Logger Temperature and Humidity
    note: LTIUSB (USB Interface Cradle) required for operration
    LTISOLOGRH Temp Humidity Certification for LTHAX08
    LTIUSB USB Interface Cradle (required for operation)
    LTBRACKET Wall Mount Bracket
    OVERVIEW:

    The LogTag Humidity & Temperature Recorder measures and stores up to 8000 sets of high resolution humidity and temperature readings over 0 to 100%RH & -40°C to +85°C (-40°F to +185°F) measurement ranges.
    Using the LogTag Interface and LogTag’s freely available companion software LogTag Analyzer, the LogTag is easily set-up for recording conditions including delayed start, sampling interval, number of readings, continuous or fixed number of readings and configuration of conditions to activate the ALERT indicator. Readings are downloaded using LogTag Analyzer, which provides facilities for charting, zooming, listing data statistics and allows exporting the data to other applications such as MS Excel.

    FEATURES:
    • Alert indicator – indicates if readings are outside of preset limits
    • OK indicator indicates if still recording and if readings within configured limits
    • Inspection mark in log by push button
    • Push Button Logging start with optional delayed start or specific Time & Date start
    • Rapid Download! Takes only seconds to download recordings
    • Fine resolution of measurement – 0.1%RH & 0.1°C/°F
    • ‘Pre-Start’ logging - Logtag can be configured to record even if it has not been started.
    • High performance at low cost
    • Credit card sized case – thin enough to be easily mailed “letter rate”.
    • Real time clock records time & temperature simultaneously
    • Easy to use LogTag Analyzer software that runs on any PC configures LogTag for recording then downloads resulting data for analysis. Data can also be exported to fomats compatible with other applications such as MS Excel
    • Re-calibration to achieve higher accuracy possible
    • Replaceable sensor air filter
    • NIST Traceable Certificate, not included, but available
    SPECIFICATIONS:
    Humdity Measurement Range 0 ~ 100%RH but with limitations as detailed in Humidity Measurement Operating and Storage conditions below
    Temperature Measurement Range -40 ~ +85°C (-40 ~ +185°F)
    Resolution 0.1%RH & 0.1°C/°F
    Capacity 8000 pairs of humidity & temperature readings (32Kbytes memory)
    Sampling frequency adjustable, 30 sec to several hours
    Logging start options Push button start or specific date & time.
    Recording indication Flashing ‘OK’ indicator flashing ‘Alert’ indicator.
    Download Time Typically with full memory (8000 pairs of readings) in less than 10 seconds depending on computer or readout device used.
    Environmental IP61 (when hung or mounted vertically)
    Power source 3V Lithium battery
    Battery life 2 ~ 3 years of normal use (based on 15 minute logging, download data monthly)
    Size 86mm(H) x 54.5mm(W) x 8.6mm(T)
    Weight 35g
    Case Material Polycarbonate
    ACCESSORIES:
    LTIUSB USB Interface Cradle
    LTBRACKET Wall Mount Bracket